How To Install Overhead Garage Doors?

Overhead Garage Door Fort Worth, TX
December 6, 2023

Installing overhead garage doors is a complex and potentially hazardous process that is best left to the professionals. However, it’s a good idea for people to familiarize themselves with the process to understand what the technician is doing. The customer is better prepared when their overhead garage door is installed when they know what to expect.

Installing an overhead garage door can take several hours and is fairly complex. Firstly, it is necessary to carefully remove the old garage door and move it out of the way. Additionally, the tech must gather all the essential materials and tools before beginning the job. We offer professional services for garage door installation and garage door opener installation as well for anyone looking to get a professional finish for their installation.

In this blog post, we will guide you through the process of installing an overhead garage door, step by step. While it’s always best to leave this job to the professionals, understanding the process can help you make informed decisions and ensure that your garage door is installed correctly. So, let’s get started!

Loosening Springs

The first step in the overhead garage door installation process is the most hazardous one. The tech must carefully loosen the old door’s springs. These springs must be treated with care because they are intense. This means they may pop out of the housing with enough force to cause injury if an untrained person tries to remove them.

The tech will grip the torsion bar with pliers and slowly loosen the spring winding cone’s screw. If this is the case, you must use a winding bar to loosen the springs.

Disconnecting the Old Garage Door

Next, unplug the old garage door from the power unit. While this step is not as hazardous as loosening the springs, the tech still needs to be very careful. This is because the power unit must be protected, or it will not be possible to use it with the new door.

Once the springs have been loosened, the tech will pull the red emergency handle to release the door from the power unit. In the event of a door detachment, the trolley arm will be vertical. To remove the door, the technician must disconnect the door section at a time. This involves removing the hinges, loosening the bolts, and pulling the panel off the track.

Installing Each Section of the New Garage Door

If the door is for a two-car garage, it is necessary to screw in a reinforcement bar. Axle supports must be mounted on both the top and bottom panels. The tech will install the new garage door section by section, beginning with the bottom panel. The tech will install hinges on the bottom panel and move it into place before connecting the panel above. They will repeat this process as many times as necessary.

Putting On The Tracks & Hinges

After the panels have been assembled, the tech will install the axles. They will then put the axles into the hinges. After this has been completed, the tech will install the tracks. Next, the tech will attach the door cable and install the bottom bracket.

Installing The Spring Assembly & Tracks

It is then necessary to attach the spring assembly to the track. In the next step, the tech will secure the top track and bottom track together.

Putting In The New Springs

The tech will put the spring, anchor, and locking together. After assembling this mechanism, they will bolt the whole thing into the header bracket.

Installing The Torsion Rod & Pulley

Following the installation of the spring, the tech must put the tension rod into the header brackets. The tech will then put the pulley on the torsion rod.

Installing the Door Cable

Next, the tech will thread the cable over the pulley and connect the pulley to the bracket.

Tightening Up The Springs

The final step is tightening up the springs to the manufacturer’s specifications. Both springs need to have the same level of tension. The tech may also spray the springs with a special lubricant.

Installing an overhead garage door is a complex and potentially hazardous process that requires the expertise of a professional technician. At Express Garage Door, we offer professional services for overhead garage door installation and garage door opener installation in Fort Worth and Dallas. Our team of experienced technicians is equipped with the necessary tools and knowledge to ensure that your garage door is installed safely and efficiently. Contact us today to schedule an appointment and get a professional finish for your garage door installation.

{ "@context": "https://schema.org/", "@type": "HowTo", "name": "How To Install Overhead Garage Doors?", "step": [ { "@type": "HowToStep", "text": "The first step in the overhead garage door installation process is the most hazardous one. The tech must carefully loosen the old door's springs. These springs must be treated with care because they are intense. This means they may pop out of the housing with enough force to cause injury if an untrained person tries to remove them.\n\nThe tech will grip the torsion bar with pliers and slowly loosen the spring winding cone's screw. If this is the case, you must use a winding bar to loosen the springs.", "name": "Loosening Springs" }, { "@type": "HowToStep", "text": "Next, unplug the old garage door from the power unit. While this step is not as hazardous as loosening the springs, the tech still needs to be very careful. This is because the power unit must be protected, or it will not be possible to use it with the new door.\n\nOnce the springs have been loosened, the tech will pull the red emergency handle to release the door from the power unit. In the event of a door detachment, the trolley arm will be vertical. To remove the door, the technician must disconnect the door section at a time. This involves removing the hinges, loosening the bolts, and pulling the panel off the track.", "name": "Disconnecting the Old Garage Door" }, { "@type": "HowToStep", "text": "If the door is for a two-car garage, it is necessary to screw in a reinforcement bar. Axle supports must be mounted on both the top and bottom panels. The tech will install the new garage door section by section, beginning with the bottom panel. The tech will install hinges on the bottom panel and move it into place before connecting the panel above. They will repeat this process as many times as necessary.", "name": "Installing Each Section of the New Garage Door" }, { "@type": "HowToStep", "text": "After the panels have been assembled, the tech will install the axles. They will then put the axles into the hinges. After this has been completed, the tech will install the tracks. Next, the tech will attach the door cable and install the bottom bracket.", "name": "Putting On The Tracks & Hinges" }, { "@type": "HowToStep", "text": "It is then necessary to attach the spring assembly to the track. In the next step, the tech will secure the top track and bottom track together.", "name": "Installing The Spring Assembly & Tracks" }, { "@type": "HowToStep", "text": "The tech will put the spring, anchor, and locking together. After assembling this mechanism, they will bolt the whole thing into the header bracket.", "name": "Putting In The New Springs" }, { "@type": "HowToStep", "text": "Following the installation of the spring, the tech must put the tension rod into the header brackets. The tech will then put the pulley on the torsion rod.", "name": "Installing The Torsion Rod & Pulley" }, { "@type": "HowToStep", "text": "Next, the tech will thread the cable over the pulley and connect the pulley to the bracket.", "name": "Installing the Door Cable" }, { "@type": "HowToStep", "text": "The final step is tightening up the springs to the manufacturer's specifications. Both springs need to have the same level of tension. The tech may also spray the springs with a special lubricant.", "name": "Tightening Up The Springs" } ] }